How do I bypass the schedule on the TH2210DH/TH2110DH/TH2210DV/TH2110DV thermostat?

Press up or down to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period.  “Temporary” will appear on the display and the current program period will flash.  The new temperature will be used until the next period begins.

To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen.

Press the Run button if you wish to cancel either override and resume the schedule. The word Hold will disappear and the thermostat will be set to the temperature programmed for the current period.  Also ensure that the heat - off - cool switch is set to the desired run mode.

Remember, after you set the desired setpoint and select your desired hold the thermostat will change back from displaying your setpoint to the room temperature.  This is normal.  Allow your heating or cooling system to reach your setpoint over time.